151 Epoxy Adhesive 2 Part Syringe Quick Drying 25g

• 151 Rapid Epoxy Syringe Adhesive two part Adhesive an Industrial strength clear adhesive.
• For repairs all around the home and work place.
• Exceptionally strong.
• setting time 4 to 6 minutes Sets hard in just 30 minutes.
• Ideal for bonding metals, jewellery precious stones, various hard plastics,
• crockery, glass, wood, fiberglass, china, dry concrete, rubber, fabrics, crystal etc.
• Can be drilled, sanded, machined, painted.

Product Application:

• Ensure surfaces are clean dry and free from dust, rust and grease.
• Roughen surfaces with sandpaper to improve adhesion.
• Remove cap from center of twin plunger and snap off tab from bottom of nozzles.
• Use plunger to push out equal lengths of resin and hardener onto a clean disposable surface.
• Replace cap on nozzles first then Mix thoroughly for 30 secs to 1 minute with mixing stick.
• Mixed adhesive is usable for only 4 minutes.
• Only mix small quantities in one go.
• Apply adhesive immediately to both surfaces.
• Assemble and hold or clamp until adhesive starts to cure.
• Carefully remove any residual adhesive with a sharp knife before adhesive sets.

Notes:

• Adhesive will cure faster at higher temperatures and conversely, slower at low temperatures.
• At 20 Deg C, the adhesive sets hard in 30 minutes and is fully cured in 12 hours.